Journal Articles


J. Park and S. Kim, "Droplet Manipulation on A Structured Shape Memory Polymer Surface," Lab on a Chip, 17, 1793-1801 (2017).


J. Eisenhaure and S. Kim, "A Review of the State of Dry Adhesives: Biomimetic Structures and the Alternative Designs They Inspire," MDPI Micromachines, 8, 125-1-125-38 (2017).


Y. Kim, S. Park, S. Kim, B.-K. Kim, Y. Choi, J.-H. Hwang, and H.J. Kim, "Flash lamp annealing of indium tin oxide thin-films deposited on polyimide backplanes," Thin Solid Films, 628, 88-95 (2017).


Z. Yang and S. Kim, "Positioning Errors in Transfer Printing-Based Microassembly," Journal of Micro-Bio Robotics, 12, 53-64 (2017).


H. Keum, Y. Jiang, J. Park, J. C. Flanagan, M. Shim, and S. Kim, "Solvent-Free Patterning of Colloidal Quantum Dot Films Utilizing Shape Memory Polymers," MDPI Micromachines, 8, 18 (2017).


J. Eisenhaure and S. Kim, "Laser-Driven Shape Memory Effect for Transfer Printing Combining Parallelism with Individual Object Control," Advanced Materials Technologies, 1, 1600098 (2016).


J. Seo, J. Eisenhaure, and S. Kim, "Micro-wedge array surface of a shape memory polymer as a reversible dry adhesive," Extreme Mechanics Letters, 9, 207 (2016).


H. Keum, Z. Yang, K. Han, D.E. Handler, T.N. Nguyen, J. Schutt-Aine, G. Bahl, and S. Kim, "Microassembly of Heterogeneous Materials using Transfer Printing and Thermal Processing," Nature Scientific Reports, 6, 29925 (2016).


S. Kim, "LEGO-like Microassembly Using Reversible Dry Adhesion," IEEE Potentials, 35, 4, 14 (2016).


S. Lee, B. Kang, H. Keum, N. Ahmed, J.A. Rogers, P.M. Ferreira, S. Kim*, and B Min*, "3D Modular Transfer Printing for Heterogeneous Assembly of Metamaterials and Metadevices," Nature Scientific Reports, 6, 27621 (2016), *co-corresponding authors.


A. Bhaswara, H. Keum, F. Mathieu, B. Legrand, S. Kim, L. Nicu, and T. Leichle, "A Simple Fabrication Process based on Micro-Masonry for the Realization of Nanoplate Resonators with Integrated Actuation and Detection Schemes," Frontiers in Mechanical Engineering, section Micro- and Nanoelectromechanical Systems, 01 March (2016).


Z. Yang, Q. Chen, A.E. Elbanna, and S. Kim, "Transfer printing enabled soft composite films for tunable surface topography," Extreme Mechanics Letters, 7, 145 (2016).


B. Jeong, C. Pettit, S. Dharmasena, H. Keum, J. Lee, J. Kim, S. Kim, D.M. McFarland, L.A. Bergman, A.F. Vakakis, and H. Cho, "Utilizing Intentional Internal Resonance to Achieve Multi-Harmonic Atomic Force Microscopy," Nanotechnology, 27, 199501 (2016).


J. Eisenhaure, S. I. Rhee, A. Al-okaily, A. Carlson, P. Ferreira, and S. Kim, "The Use of Shape Memory Polymers for MEMS Assembly," IEEE/ASME Journal of Microelectromechanical Systems, 25, 69 (2016).


Z. Yang, B. Jeong, A. Vakakis, and S. Kim, "A Tip-Tilt-Piston Micromirror with An Elastomeric Universal Joint Fabricated via Micro-Masonry," IEEE/ASME Journal of Microelectromechanical Systems Letters, 24, 262 (2015).


Y. Xue, Y. Zhang, X. Feng, S. Kim, J.A. Rogers, and Y. Huang, "A theoretical model of reversible adhesion in shape memory surface relief structures and its application in transfer printing," Journal of the Mechanics and Physics of Solids, 77, 27 (2015).


H. Ning*, N.A. Krueger*, X. Sheng, H. Keum, C. Zhang, K.D. Choquette, X. Li, S. Kim, J.A. Rogers, and P.V. Braun, "Transfer printing of tunable porous silicon microcavities with embedded emitters," ACS Photonics, 1, 1144 (2014).


B. Jeong, H. Cho, H. Keum, S. Kim, D.M McFarland, L.A. Bergman, W.P. King, and A.F. Vakakis, "Complex Nonlinear Dynamics in the Limit of Weak Coupling of a System of Microcantilevers Connected by a Geometrically Nonlinear Tunable Nanomembrane," Nanotechnology, 25, 465501 (2014).


A. Bhaswara, H. Keum, S. Rhee, B. Legrand, F. Mathieu, S. Kim, L. Nicu, and T. Leichle, "Fabrication of Nanoplate Resonating Structures via Micro-Masonry," Journal of Micromechanics and Microengineering, 24, 115012 (2014).


J. Eisenhaure, S. I. Rhee, A. Al-okaily, A. Carlson, P. Ferreira, and S. Kim, "The Use of Shape Memory Polymers for Microassembly by Transfer Printing," IEEE/ASME Journal of Microelectromechanical Systems Letters, 23, 1012 (2014).


J. Eisenhaure, and S. Kim, "An Internally Heated Shape Memory Polymer Dry Adhesive," Polymers, 6, 2274 (2014).


H. Keum and S. Kim, "Micro-Masonry for 3D Additive Micromanufacturing," Journal of Visualized Experiments, 90, e51974 (2014).


Y. Zhang, H. Keum, K. Park, R. Bashir, and S. Kim, "Micro-Masonry of MEMS Sensors and Actuators," IEEE/ASME Journal of Microelectromechanical Systems, 23, 308 (2014).


J. Eisenhaure, T. Xie, S. Varghese, and S. Kim, "Microstructured Shape Memory Polymer Surfaces with Reversible Dry Adhesion," ACS Applied Materials and Interfaces, 5, 7714 (2013).


H. Keum*, H. Chung*, and S. Kim, "Electrical Contact at The Interface between Silicon and Transfer-Printed Gold Films by Eutectic Joining,"ACS Applied Materials and Interfaces, 5, 6061 (2013) *equally contributing authors.


J.-W. Jeong, B. Park, H. Keum, S. Kim, J. A. Rogers, and O. Solgaard, "Two-Axis MEMS Scanner with Transfer-Printed High-Reflectivity, Broadband Monolithic Silicon Photonic Crystal Mirrors," Optics Express, 21, 13800 (2013) .


H. Keum, M. Seong, S. Sinha, and S. Kim, "Electrostatically Driven Collapsible Au Thin Films Assembled Using Transfer Printing for Thermal Switching,"Applied Physics Letters, 100, 211904 (2012).


H. Keum, A. Carlson, H. Ning, A. Mihi, J. Eisenhaure, P.V. Braun, J.A. Rogers, and S. Kim, "Silicon Micro-Masonry Using Elastomeric Stamps for Three-Dimensional Microfabrication,"Journal of Micromechanics and Microengineering, 22, 055018 (2012).


H. Cheng, M. Li, J. Wu, A. Carlson, S. Kim, Y. Huang, Z. Kang, K.-C. Hwang, and J.A. Rogers, "A Viscoelastic Model for the Rate Effect in Transfer Printing," ASME Journal of Applied Mechanics, 80, 041019 (2012).


Y. Su, Z. Liu, S. Kim, J. Wu, Y. Huang, and J.A. Rogers, "Mechanics of stretchable electronics with high fill factors,"International Journal of Solids & Structures, 49, 3416 (2012).


S. Kim*, A. Carlson*, H. Cheng, S. Lee, J.-K. Park, Y. Huang, J.A. Rogers, "Enhanced Adhesion With Pedestal-Shaped Elastomeric Stamps for Transfer Printing,"Applied Physics Letters, 100, 171909 (2012) *equally contributing authors.


S.Y. Yang, A. Carlson, H. Cheng, Q. Yu, N. Ahmed, J. Wu, S. Kim, M. Sitti, P.M. Ferreira, Y. Huang, and J.A. Rogers, "Elastomer surfaces with directionally dependent adhesion strength and their use in transfer printing with continuous roll-to-roll applications,"Advanced Materials, 24, 2117 (2012).


H. Yang, D. Zhao, J.-H. Seo, S. Chuwongin, S. Kim, J.A. Rogers, Z. Ma, and W. Zhou, "Broadband membrane reflectors on glass,"IEEE Photonics Technology Letters, 24, 476 (2012).


S. Kim, Y. Su, A. Mihi, S. Lee, Z. Liu, T.K. Bhandakkar, J. Wu, J.B. Geddes III, H.T. Johnson, Y. Zhang, J.-K. Park, P.V. Braun, Y. Huang, and J.A. Rogers, "Imbricate scales as a design construct for microsystems technologies,"Small, 8, 901 (2012).


Y. Menguc, S.Y. Yang, S. Kim, J.A. Rogers, and M. Sitti, "Gecko-inspired controllable adhesive structures applied to micromanipulation,"Advanced Functional Materials, 22, 1245 (2012).


J. Wu, S. Kim, A. Carlson, C.F. Lu, K.-C. Hwang, Y. Huang, and J.A. Rogers, "Contact radius of stamps in reversible adhesion,"Theoretical and Applied Mechanics Letters, 1, 011001 (2011).


D.-W. Oh*, S. Kim*, J.A. Rogers, D.G. Cahill, and S. Sinha, "Interfacial thermal conductance of transfer-printed metal films,"Advanced Materials, 23, 5028 (2011) *equally contributing authors.


J. Wu, S. Kim, W. Chen, A. Carlson, K.-C. Hwang, Y. Huang, and J.A. Rogers, "Mechanics of reversible adhesion,"Soft Matter, 7, 8657 (2011).


H. Kim, E. Brueckner, J. Song, Y. Li, S. Kim, C. Lu, J. Sulkin, K. Choquette, Y. Huang, R.G. Nuzzo, and J.A. Rogers, "Unusual strategies for using indium gallium nitride grown on silicon (111) for solid-state lighting,"Proceedings of the National Academy of Sciences of the USA, 108, 10072 (2011).


S. Kim, J. Wu, A. Carlson, S.H. Jin, A. Kovalsky, P. Glass, Z. Liu, N. Ahmed, S.L. Elgan, W. Chen, P.M. Ferreira, M. Sitti, Y. Huang, and J.A. Rogers, "Microstructured elastomeric surfaces with reversible adhesion and examples of their use in deterministic assembly by transfer printing,"Proceedings of the National Academy of Sciences of the USA, 107, 17095 (2010).


S. Kim, M. Sitti, T. Xie, and X. Xia, "Reversible dry micro-fibrillar adhesives with thermally controllable adhesion,"Soft Matter, 5, 3689 (2009).


S. Kim, E. Cheung, and M. Sitti, "Wet self-cleaning of biologically inspired elastomer mushroom shaped microfibrillar adhesives," Langmuir, 25, 7196 (2009).


M. P. Murphy, S. Kim, and M. Sitti, "Enhanced adhesion by gecko-inspired hierarchical fibrillar adhesives,"ACS Applied Materials & Interfaces, 1, 849 (2009).


R. Long, C.-Y. Hui, S. Kim, and M. Sitti, "Modeling the soft backing layer thickness effect on adhesion of elastic microfiber arrays," Journal of Applied Physics, 104, 044301 (2008).


S. Kim, B. Aksak, and M. Sitti, "Enhanced friction of elastomer microfiber adhesives with spatulate tips," Applied Physics Letters, 91, 221913 (2007) .


S. Kim, M. Sitti, C.-Y. Hui, R. Long, and A. Jagota, "Effect of backing layer thickness on adhesion of single-level elastomer fiber arrays," Applied Physics Letters, 91, 161905 (2007).


S. Kim and M. Sitti, "Biologically inspired polymer microfibers with spatulate tips as repeatable fibrillar adhesives" Applied Physics Letters, 89, 261911 (2006).